|
Field Monitor |
Near |
|
Type |
Active – two power amplifiers:
-
Tweeter: monolithic integrated circuit TDA7294
-
Woofer: monolithic integrated circuit TDA7294
|
|
System |
Two-way |
|
Crossover Frequency |
1.5 kHz (slope: 24 dB/octave) |
|
Dimensions: Height x Width x Depth |
33 cm x 21 cm x 30 cm / 13.0'' x 8.3'' x 11.8'' |
|
Free Field Frequency Response |
+/- 2 dB: 44 Hz - 30 kHz |
|
SPL in Free Field @ 1m |
RMS: 104 dB
Peak: 112 dB |
|
Weight |
13 kg / 28.6 lbs |
|
Loudspeakers |
|
|
Bass/Mid-Range Loudspeaker |
Ø 7''
Diaphragm: cellulose, surround: rubber
Magnetically Shielded |
|
Tweeter loudspeaker |
Ø 1'' in two versions:
-
Titanium dome
-
Fabric dome
Magnetically Shielded |
|
Amplifiers |
|
|
Bass/Mid-Range Power Amplifier |
70 W RMS @ 8Ω |
|
Tweeter Power Amplifier |
70 W RMS @ 6Ω |
|
Total Harmonic Distortions |
0.005 % – PO = 5 W, f = 1 kHz
0.1 % max – PO = 0.1 up to 50 W, f = 20 Hz up 20 kHz |
|
Signal to Noise Ratio |
103.5 dB – weighted by A curve
101 dB – in band of 20 Hz up to 20 kHz |
|
Input Voltage Level for 100 dB SPL in Free Field @ 1m |
0 dBu (i.e. 0.775 V) – calibrated regulators in 0 dBu, 0 dB positions |
|
Calibrated Controls |
|
|
Input Sensitivity Switch |
30dBu, 22dBu, 15dBu, 9dBu, 4dBu, 0dBu, -3dBu, 10dBV |
|
Bass Controller Level Switch |
-15dB, -12dB, -9dB, -6dB, -3dB, 0dB, 3dB, 6dB |
|
Bass Controller Switch |
Position ON: bass-reflex with active filter
Position OFF: "clear" quick bass-reflex |
|
Tweeter Loudspeaker Level Switch |
-5dB, -3dB, -1.5dB, -0.5dB, 0dB, 0.5dB, 1.5dB, 3dB |
|
Inputs, Outputs |
|
|
Input |
Two Types (common socket Combo):
-
XLR symmetrical (balanced)
-
TRS symmetrical (balanced) 6.3 mm
Input Impedance 10 kΩ |
|
„Loop Through” Output |
XLR symmetrical
Output Impedance 100Ω |
|
Protections |
|
|
Tweeter Loudspeaker Protection |
Limiter (optical) |
|
Bass/Mid-Range Loudspeaker Protection |
Limiter (optical) |
|
Power Amplifiers Protections |
Interference, thermal, short circuit and over-current limiters |
+45 70 20 90 99